Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 99

Compaq Network Interface Cards, Test Error Codes, Table 3-14

Get Compaq ProLiant 1600 PDF manuals and user guides View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 99 highlights

3-45 Compaq Network Interface Cards Test Error Codes The 6000 series of Diagnostic error codes identifies failures with 32-bit DualSpeed NetFlex-2/Token Ring Controllers. Corrective action may require replacement of the 32-bit DualSpeed NetFlex-2/Token Ring Controller. Table 3-14 Compaq Network Interface Cards Test Error Codes Error Code Description Recommended Action 6000-xx Network card ID failed. The following steps apply to error 6001-xx Network card setup failed. codes 6000-xx through 6089-xx: 6002-xx Network card transmit failed. 1. Check the controller 6014-xx Network card configuration failed. installation in the EISA slot. 6016-xx Network card reset failed. 2. Check the interrupt type and 6028-xx Network card internal failed. number setting. 6029-xx Network card external failed. 3. Check the media connection 6089-xx Network card open failed. at the controller and 6090-xx Network card initialization failed. Multistation Access Unit 6091-xx Network card Internal loopback failed. (MAU)*. 6092-xx Network card external loopback 4. Check the media speed failed. (4/16 ) and type Unshielded Twisted Pair/Shielded Twisted Pair (UTP/STP) settings. 5. Check the MAU, cabling, or other network components. 6. Replace the controller. Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-45
Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide
Compaq Network Interface Cards
Test Error Codes
The 6000 series of Diagnostic error codes identifies failures with
32-bit DualSpeed NetFlex-2/Token Ring Controllers. Corrective action may require
replacement of the 32-bit DualSpeed NetFlex-2/Token Ring Controller.
Table 3-14
Compaq Network Interface Cards
Test Error Codes
Error Code
Description
Recommended Action
6000-xx
6001-xx
6002-xx
6014-xx
6016-xx
6028-xx
6029-xx
6089-xx
6090-xx
6091-xx
6092-xx
Network card ID failed.
Network card setup failed.
Network card transmit failed.
Network card configuration failed.
Network card reset failed.
Network card internal failed.
Network card external failed.
Network card open failed.
Network card initialization failed.
Network card Internal loopback failed.
Network card external loopback
failed.
The following steps apply to error
codes 6000-xx through 6089-xx:
1.
Check the controller
installation in the EISA slot.
2.
Check the interrupt type and
number setting.
3.
Check the media connection
at the controller and
Multistation Access Unit
(MAU)*.
4.
Check the media speed
(4/16 ) and type Unshielded
Twisted Pair/Shielded Twisted
Pair (UTP/STP) settings.
5.
Check the MAU, cabling, or
other network components.
6.
Replace the controller.