Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 79
Replace the Array, in Array Accelerator
View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3-25 POST Error Messages Continued Error Code Audible Beeps L=Long S=Short Probable Source of Problem 1793-Drive None This indicates that Array - Array while the system was Accelerator in use, power was Battery interrupted while Depleted - data was in the Array Data Lost Accelerator memory. (Error message Array Accelerator 1794 also displays.) batteries failed. Data in Array Accelerator has been lost. 1794-Drive Array - Array None This is a warning that the battery charge is Accelerator below 75%. Posted Battery writes are disabled. Charge Low. Array Accelerator is temporarily disabled. Array Accelerator will be reenabled when battery reaches full charge. 1795-Drive None This indicates that Array - Array while the system was Accelerator in use, power was Configuration interrupted while Error. data was in the Array Data does not Accelerator memory. correspond to The data stored in the this drive array. Array Accelerator Array does not correspond Accelerator is temporarily to this drive array. disabled. Action Power was not restored within eight to ten days. Perform orderly system shutdowns to avoid data remaining in the Array Accelerator. Replace the Array Accelerator board if batteries do not recharge within 36 power-on hours. Match the Array Accelerator to the correct drive array, or run the System Configuration Utility to clear the data in the Array Accelerator. Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide