Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 31
CD-ROM Drive, Disconnect the CD-ROM cable.
View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2-13 CD-ROM Drive To remove the CD-ROM drive: 1. Perform the preparation procedures. See page 2-2. 2. Open the front bezel. 3. Remove the left side access panel. See page 2-8. 4. Remove the two T-15 screws and washers from the front of the drive. 5. Disconnect the CD-ROM cable. 6. Slide the CD-ROM drive out the front of the chassis. 7. Disconnect the power cable. Figure 2-8. Removing the CD-ROM Drive Reverse steps 1 through 7 to replace the CD-ROM drive. Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-13
Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide
CD-ROM Drive
To remove the CD-ROM drive:
1.
Perform the preparation procedures. See page 2-2.
2.
Open the front bezel.
3.
Remove the left side access panel. See page 2-8.
4.
Remove the two T-15 screws and washers from the front of the drive.
5.
Disconnect the CD-ROM cable.
6.
Slide the CD-ROM drive out the front of the chassis.
7.
Disconnect the power cable.
Figure 2-8.
Removing the CD-ROM Drive
Reverse steps 1 through 7 to replace the CD-ROM drive.