Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 36
I/O Fan, Disconnect the I/O fan cable and slide it out of the clip
View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2-18 Removal and Replacement Procedures I/O Fan To remove the I/O fan: 1. Perform the preparation procedures. See page 2-2. 2. Remove the top cover. See page 2-9. 3. Loosen the single thumbscrew attaching the I/O fan to the chassis . 4. Tilt the top of the I/O fan forward and away from the chassis . 5. Disconnect the I/O fan cable and slide it out of the clip . 6. Lift the I/O fan away from the chassis. 1 2 3 Figure 2-15. Removing the I/O Fan Reverse steps 1 through 6 to replace the I/O fan.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-18
Removal and Replacement Procedures
I/O Fan
To remove the I/O fan:
1.
Perform the preparation procedures. See page 2-2.
2.
Remove the top cover. See page 2-9.
3.
Loosen the single thumbscrew attaching the I/O fan to the chassis
.
4.
Tilt the top of the I/O fan forward and away from the chassis
.
5.
Disconnect the I/O fan cable and slide it out of the clip
.
6.
Lift the I/O fan away from the chassis.
1
2
3
Figure 2-15.
Removing the I/O Fan
Reverse steps 1 through 6 to replace the I/O fan.