Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 56
Utility Access, The Compaq SmartStart and Support Software CD contains the SmartStart program
View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
3-2 Diagnostic Tools Utility Access The Compaq SmartStart and Support Software CD contains the SmartStart program and many of the Compaq utilities needed to maintain your system, including: s System Configuration Utility s Array Configuration Utility s Drive Array Advanced Diagnostics Utility s ROMPaq Firmware Upgrade Utilities CAUTION: Do not select the Erase Utility when running the SmartStart and Support Software CD. This will result in data loss to the entire system. There are several ways to access these utilities: s Run the Utilities on the system partition. If the system was installed using SmartStart, the Compaq utilities are automatically available on the system partition. The system partition could also have been created during a manual system installation. To run the utilities on the system partition, boot the system and press F10 when you see the following message: "Press F10 for system partition utilities." Then select the utilities from the menu. t System Configuration Utility is available under System Configuration menu. t Array Configuration Utility is available under the System Configuration menu. t Drive Array Advanced Diagnostics Utility is available under the Diagnostics and Utilities menu. t ROMPaq Firmware Upgrade Utility is available under the Diagnostics and Utilities menu.