Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 86
Memory Test Error Codes, Table 3-3
View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
3-32 Diagnostic Tools Primary Processor Test Error Codes Continued Error Code Description Recommended Action 122-xx 123-xx Multiprocessor Dispatch test failed. 1. Check the system configuration Interprocessor Communication test and failed. retest. 2. Replace the processor board and retest. 3. Replace the system board and retest. 199-xx Installed devices test failed. 1. Check the system configuration and retest. 2. Verify cable connections and retest. 3. Check switch and/or jumper settings and retest. 4. Run the Configuration utility and retest. 5. Replace the processor board and retest. 6. Replace the system board and retest. Memory Test Error Codes The 200 series of Diagnostic error codes identifies failures with the memory subsystem. Corrective action may require replacement of the memory expansion board, the memory modules, or the processor assembly. Table 3-3 Memory Test Error Codes Error Code Description 200-xx Invalid memory configuration. 201-xx 202-xx Memory machine ID test failed. Memory system ROM checksum failed. Recommended Action Reinsert memory modules in correct location and retest. The following steps apply to error codes 201-xx and 202-xx: 1. Replace the system ROM and retest. 2. Replace the processor board and retest. 3. Replace the memory expansion board and retest.