Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 93

Serial Test Error Codes, Modem Communications Test Error Codes, Table 3-9

Get Compaq ProLiant 1600 PDF manuals and user guides View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

3-39 Serial Test Error Codes The 1100 series of Diagnostic error codes identifies failures with serial/parallel interface board or system board functions. Corrective action may require replacement of the serial/parallel interface board or the system board assembly. Table 3-9 Serial Test Error Codes Error Code Description 1101-xx Serial port test failed. 1109-xx Clock register test failed. Recommended Action The following steps apply to error codes 1101-xx and 1109-xx: 1. Check the switch settings on the Serial/Parallel Interface board (if applicable) and retest. 2. Replace the Serial/Parallel Interface board (if applicable) and retest. 3. Replace the system board and retest. Modem Communications Test Error Codes The 1200 series of Diagnostic error codes identifies failures with the modem. Corrective action may require replacement of the modem. Table 3-10 Modem Communications Test Error Codes Error Code Description Recommended Action 1201-xx 1202-xx 1203-xx 1204-xx 1206-xx 1210-xx Modem internal loopback test failed. The following steps apply to error Modem time-out test failed. codes 1201-xx through 1210-xx: Modem external termination test failed.1. Refer to the modem Modem auto originate test failed. documentation for correct Dial multi-frequency tone test failed. setup procedures and retest. Modem direct connect test failed. 2. Check the modem line and retest. 3. Replace the modem and retest. Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-39
Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide
Serial Test Error Codes
The 1100 series of Diagnostic error codes identifies failures with serial/parallel interface
board or system board functions. Corrective action may require replacement of the
serial/parallel interface board or the system board assembly.
Table 3-9
Serial Test Error Codes
Error Code
Description
Recommended Action
1101-xx
1109-xx
Serial port test failed.
Clock register test failed.
The following steps apply to error
codes 1101-xx and 1109-xx:
1.
Check the switch settings on
the Serial/Parallel Interface
board (if applicable) and
retest.
2.
Replace the Serial/Parallel
Interface board (if applicable)
and retest.
3.
Replace the system board
and retest.
Modem Communications Test Error Codes
The 1200 series of Diagnostic error codes identifies failures with the modem. Corrective
action may require replacement of the modem.
Table 3-10
Modem Communications Test Error Codes
Error Code
Description
Recommended Action
1201-xx
1202-xx
1203-xx
1204-xx
1206-xx
1210-xx
Modem internal loopback test failed.
Modem time-out test failed.
Modem external termination test failed.
Modem auto originate test failed.
Dial multi-frequency tone test failed.
Modem direct connect test failed.
The following steps apply to error
codes 1201-xx through 1210-xx:
1.
Refer to the modem
documentation for correct
setup procedures and retest.
2.
Check the modem line and
retest.
3.
Replace the modem and
retest.