Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 45
Processor Power Module
View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2-27 Processor Power Module Compaq ProLiant 1600 To remove the processor power module from a Compaq ProLiant 1600 Server: 1. Perform the preparation procedures. See page 2-2. 2. Remove the processor cage (see page 2-21) and open the cage door. 3. Remove the Pentium II adapter board and place it on a non-conductive work surface. See page 2-23. 4. Pull out the clips on each end of the processor power module . 5. Slide the processor power module from the Pentium II adapter board . 1 2 Figure 2-24. Removing the Processor Power Module from the Compaq ProLiant 1600 Server Reverse steps 1 through 5 to replace a processor power module in the Compaq ProLiant 1600 Server. The clips on the processor power module will snap into a locked position automatically when the processor power module is pushed into the slot. Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide