Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 117
Compaq NIC Boards Test Error Codes, Table 3-15
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Diagnostic Tools 3-39 Table 3-14 Advanced VGA Board Test Error Codes continued Error Code Description 2432-xx 320 x 200 graphics (256-color mode) test failed. 2448-xx Advanced VGA controller test failed. 2451-xx 132-column Advanced VGA test failed. 2456-xx Advanced VGA 256-Color test failed. 2458-xx Advanced VGA bit BLT test 2468-xx Advanced VGA DAC test 2477-xx Advanced VGA data path test 2480-xx Advanced VGA DAC test Recommended Action 1. Run Setup. 2. Replace the system board and retest. 6000 - 6099, Compaq NIC Boards Test Error Codes The 6000 series of diagnostic error codes identifies failures with 32-bit DualSpeed Compaq NetFlex-2/Token Ring Controllers. Table 3-15 Compaq Network Interface Controller Boards Test Error Codes Error Code 6000-xx 6001-xx 6002-xx 6014-xx 6016-xx 6028-xx 6029-xx 6089-xx 6090-xx 6091-xx 6092-xx Description Network card ID failed. Network card setup failed. Network card transmit failed. Network card configuration failed. Network card reset failed. Network card internal failed. Network card external failed. Network card open failed. Network card initialization failed. Network card internal loopback failed. Network card external loopback failed. Recommended Action 1. Check the controller installation in the EISA slot. 2. Check the interrupt type and number setting. 3. Check the media connection at the controller and Multistation Access Unit (MAU). 4. Check the media speed (4/16) and type of Unshielded Twisted Pair/Shielded Twisted Pair (UTP/STP) settings. 5. Check the MAU, cabling, or other network components. 6. Replace the controller.