Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 45
Memory Board, Removing the Processor and Memory Module
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2-22 Compaq ProLiant 8500 Server Maintenance and Service Guide Memory Board WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. To remove a memory board: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Open the processor and memory module drawer. See "Memory Board Opening and Removing the Processor and Memory Module" earlier in this chapter. 3. Rotate the memory board ejectors outward , and then remove the memory board from the processor board . 4. Place the memory expansion board, components facing up, on a flat surface. 1 1 2 Figure 2-16. Removing the memory board IMPORTANT: The memory board is part of the system interconnect scheme and must be seated properly for server startup. Reverse steps 1 through 4 to replace the memory board.