Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 60
Removing the I/O Module from Tower Model Servers, Reach into the rack and pull out the I/O module
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Removal and Replacement Procedures 2-37 6. Rotate the cable management arm to the left and out of the way . 3 Figure 2-28. Rotating the cable management arm to the left 7. Push in on the sides of the stop latches and rotate the cam levers downward. See "Removing the I/O Module from Tower Model Servers" earlier in this chapter. 8. Press the stop latches inward, and remove the I/O module just enough to clear the stops. See "Removing the I/O Module from Tower Model Servers" earlier in this chapter. 9. Reach into the rack and pull out the I/O module, making sure that the I/O module stop latches clear the sides of the rack. Reverse steps 1 through 9 to reinstall the I/O module in the server.
Removal and Replacement Procedures
2-37
6.
Rotate the cable management arm to the left and out of the way
.
3
Figure 2-28.
Rotating the cable management arm to the left
7.
Push in on the sides of the stop latches and rotate the cam levers downward.
See
“
Removing the I/O Module from Tower Model Servers
”
earlier in this chapter.
8.
Press the stop latches inward, and remove the I/O module just enough to clear the stops.
See
“
Removing the I/O Module from Tower Model Servers
”
earlier in this chapter.
9.
Reach into the rack and pull out the I/O module, making sure that the I/O module stop
latches clear the sides of the rack.
Reverse steps 1 through 9 to reinstall the I/O module in the server.