Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 56

Processor Board, to enter the ROM-based System Configuration Utility.

Get Compaq ProLiant 8500 PDF manuals and user guides View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Removal and Replacement Procedures 2-33 After replacing the cache accelerator, complete the following steps to clear the cache accelerator POST Error 220: 1. Reboot the server and press F9 to enter the ROM-based System Configuration Utility. 2. Once in the utility, select Advanced Options. 3. Select Set Cache Accelerator Corrected. 4. Select the slot, either 1 or 2, that has been corrected. 5. Press ESC twice, and then press F10 to save. The bit in NVRAM is cleared at this point. If the cache accelerator replacement has been successful, POST Error 220 should no longer appear at reboot. Processor Board The processor board is located at the bottom of the processor and memory module and should not be removed. If there is a need to replace the processor board, a new processor module with system board must be ordered. The new processor board will be attached to the bottom of the module, along with processor guide rails.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
Removal and Replacement Procedures
2-33
After replacing the cache accelerator, complete the following steps to clear the cache accelerator
POST Error 220:
1.
Reboot the server and press
F9
to enter the ROM-based System Configuration Utility.
2.
Once in the utility, select Advanced Options.
3.
Select Set Cache Accelerator Corrected.
4.
Select the slot, either 1 or 2, that has been corrected.
5.
Press
ESC
twice, and then press
F10
to save.
The bit in NVRAM is cleared at this point. If the cache accelerator replacement has been
successful, POST Error 220 should no longer appear at reboot.
Processor Board
The processor board is located at the bottom of the processor and memory module and should
not be removed. If there is a need to replace the processor board, a new processor module with
system board must be ordered. The new processor board will be attached to the bottom of the
module, along with processor guide rails.