Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 87
Error Code, Audible Beeps, Probable Source of Problem, Recommended Action, Flash the ROM using ROMPaq.
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Diagnostic Tools 3-9 Table 3-2 POST Error Messages continued Error Code Audible Beeps Unsupported Processor Detected System Halted. 1 long, 1 short 101-ROM Error 1 long, 1 short 101-I/O ROM Error None 102-System Board Failure 104-ASR-2 Timer Failure 105-Current System ROM is corrupt - now booting redundant System ROM 162-System Options Not Set 163-Time & Date Not Set 164-Memory Size Error 172-Configuration Non-volatile Memory Invalid 173-Slot ID Mismatch 174-Configuration/ Slot Mismatch Device Not Found 175-Configuration/ Slot Mismatch Device Found 177-Configuration Not Complete 178-Processor Configuration Invalid None None 2 long 2 short 2 short 2 short None None None None None None Probable Source of Problem Processor not supported by current system ROM. System ROM checksum Options ROM checksum 8237 DMA controllers, 8254 timers, etc. System board failure Non-booted ROM image is corrupted Recommended Action Check documentation for supported processors. If supported, remove the processor and update system to latest ROM. Run Compaq Diagnostics. Replace failed assembly as indicated. Run Compaq Diagnostics. Replace failed assembly as indicated. Replace the system board. Run the server setup utility. Run Compaq Diagnostics. Replace failed assembly as indicated. Flash the ROM using ROMPaq. Configuration incorrect Invalid time or date in configuration memory Configuration memory incorrect Nonvolatile configuration corrupt or jumper installed Run the server setup utility and correct. Run the server setup utility and correct. Run the server setup utility and correct. Run the server setup utility and correct. Board replaced, configuration not updated EISA or PCI board not found Run the server setup utility and correct. Run the server setup utility and correct. EISA or PCI board added, configuration not updated Run the server setup utility and correct. Incomplete System Configuration detected. Processor type or step does not match configuration memory. Run the server setup utility and correct. Run the server setup utility and correct. continued