Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 90
X-Parallel Port X, Run Compaq Diagnostics
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
3-12 Compaq ProLiant 8500 Server Maintenance and Service Guide Table 3-2 POST Error Messages continued Error Code Audible Beeps 304-Keyboard or None System Unit Error 40X-Parallel Port X Address Assignment Conflict 404-Parallel Port Address Conflict Detected. A hardware conflict in your system is keeping some system components from working correctly. If you have recently added new hardware, remove it to see if it is the cause of the conflict. Alternatively, use Computer Setup or your operating system to ensure that no conflicts exist. 601-Diskette Controller Error 2 short 2 short None 602-Diskette Boot None Record Error 605-Diskette Drive Type Error 2 short Probable Source of Problem Keyboard, keyboard cable, or system board failure occurred. Both external and internal ports are assigned to parallel port X. Recommended Action 1. Make sure the keyboard is attached. 2. Run Compaq Diagnostics to determine which part is in error. 3. Replace the part indicated. Run the server setup utility to correct the part assignment. A hardware conflict in your system is preventing the parallel port from working correctly. 1. If you have recently added new hardware, remove it to see if the hardware is the cause of the conflict. 2. Run your server setup utility to reassign resources for the parallel port and manually resolve the resource conflict. 3. Run Compaq Diagnostics to resolve the issue. Diskette controller circuitry failure occurred. The boot sector on the boot disk is corrupt. Mismatch in drive type occurred. 1. Make sure the diskette drive cables are attached. 2. Replace the diskette drive, the cable, or both. 3. Research and replace failed assembly as indicated. 1. Remove diskette from the diskette drive. 2. Replace diskette in drive. 3. Reformat diskette. Run the server setup utility to set diskette drive type correctly. continued