Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 61
Locating the I/O Expansion Slots, and Table 2-7. Bus balancing is not required.
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
2-38 Compaq ProLiant 8500 Server Maintenance and Service Guide Locating the I/O Expansion Slots The I/O expansion slots are located on the I/O board in the I/O module. The I/O board in the Compaq ProLiant 8500 server uses two 33-MHz PCI buses and one 66-MHz bus. The PCI expansion slots associated with each of the three PCI buses are identified in Figure 2-29, Figure 2-30, and Table 2-7. Bus balancing is not required. WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. 2 1 123456789 3 10 11 Figure 2-29. Diagram of I/O slot connections from the rear of the server 11 10 98 7654 321 Figure 2-30. Bus distribution of PCI Hot Plug slots
2-38
Compaq ProLiant 8500 Server Maintenance and Service Guide
Locating the I/O Expansion Slots
The I/O expansion slots are located on the I/O board in the I/O module. The I/O board in the
Compaq ProLiant 8500 server uses two 33-MHz PCI buses and one 66-MHz bus. The
PCI expansion slots associated with each of the three PCI buses are identified in Figure 2-29,
Figure 2-30, and Table 2-7. Bus balancing is not required.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.
1
2
3
4
5
6
7
8
9
10
11
2
1
3
Figure 2-29.
Diagram of I/O slot connections from the rear of the server
1
2
3
4
5
6
7
8
9
10
11
Figure 2-30.
Bus distribution of PCI Hot Plug slots