Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 64

and LED Indicators., Connectors, Switches

Get Compaq ProLiant 8500 PDF manuals and user guides View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Removal and Replacement Procedures 2-41 4. When the green LED is off, disconnect the cables to the PCI expansion board.   5. Press down on the top of the expansion slot , and open the slot release lever .  6. Lift up the I/O plenum .  7. Remove the PCI expansion board . 8. Return power to the slot through the PCI Hot Plug button. The green LED will flash during the power up transition and will glow steadily when power up is complete. For more information on PCI Hot Plug LED indicators, see Chapter 4, "Connectors, Switches, and LED Indicators." 5 2 3 4 Figure 2-33. Removing a PCI expansion board Reverse steps 1 through 8 to replace the PCI expansion board. IMPORTANT: If you have installed the Integrated Array Bypass kit, you will not be able to use it with the options installed in slots 10 or 11. IMPORTANT: If only removing the board, install an expansion slot cover in the slot. IMPORTANT: Remove any shipping brackets from the replacement board prior to installation.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
Removal and Replacement Procedures
2-41
4.
When the green LED is off, disconnect the cables to the PCI expansion board.
5.
Press down on the top of the expansion slot
, and open the slot release lever
.
6.
Lift up the I/O plenum
.
7.
Remove the PCI expansion board
.
8.
Return power to the slot through the PCI Hot Plug button. The green LED will flash
during the power up transition and will glow steadily when power up is complete. For
more information on PCI Hot Plug LED indicators, see Chapter 4,
“
Connectors, Switches,
and LED Indicators.
”
2
3
4
5
Figure 2-33.
Removing a PCI expansion board
Reverse steps 1 through 8 to replace the PCI expansion board.
IMPORTANT:
If you have installed the Integrated Array Bypass kit, you will not be able to use it with the
options installed in slots 10 or 11.
IMPORTANT:
If only removing the board, install an expansion slot cover in the slot.
IMPORTANT:
Remove any shipping brackets from the replacement board prior to installation.