Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 88

Run Diagnostics. Replace failed, Single Bits Errors

Get Compaq ProLiant 8500 PDF manuals and user guides View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

3-10 Compaq ProLiant 8500 Server Maintenance and Service Guide Table 3-2 POST Error Messages continued Error Code Audible Beeps 180-Log Reinitialized None 201-Memory Error 202-Memory Type Mismatch None 2 short 203-Memory Address Error 207-ECC Corrected Single Bits Errors in DIMM in Memory Module Socket 207-Invalid Memory Configuration Check DIMM Installation 208-Invalid Memory Speed - Check DIMM Installation 209-Memory Detection Failure Check Memory Installation 211 Invalid Voltage Regulator Module installed for Processor X 212-System Processor Failed/ Mapped out 214-Processor PPM Failed Module X 215-Non-functioning Voltage Regulator Module for Processors None 2 short None 1 long, 1 short 1 long, 1 short None 1 short None None Probable Source of Problem The Integrated Management Log has been reinitialized, probably due to corruption of the log. RAM failure detected An incompatible memory module is installed in the system. RAM failure detected A memory module is malfunctioning. Memory module installed incorrectly Recommended Action Event message, no action needed. Run Diagnostics. Replace failed assembly as indicated. Compare Compaq part numbers from installed memory modules with the manual. If not listed, the memory modules are incompatible and should be replaced or removed. Run Diagnostics. Replace failed assembly as indicated. Run Compaq Diagnostics. Replace or remove malfunctioning memory module as indicated. Verify placement of memory modules. The speed of the memory is not compatible. Unable to size memory Non-redundant Processor Power Module (PPM) installed in indicated processor slot. Verify the speed of the memory modules installed, then check your server user documentation and replace as indicated. Check memory module installation. If error persists, call Compaq authorized service provider. Replace with a PPM that supports redundancy. Processor in slot X failed Run Compaq Diagnostics and replace failed processor. Indicated Processor Power Module (PPM) failed. Indicated Processor Power Module PPM (DC-DC Converter) has failed or lost redundancy. Replace failed PPM assembly as indicated. Run Compaq Diagnostics. Replace failed assembly if necessary continued

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
3-10
Compaq ProLiant 8500 Server Maintenance and Service Guide
Table 3-2
POST Error Messages
continued
Error Code
Audible Beeps
Probable Source of Problem
Recommended Action
180-Log Reinitialized
None
The Integrated Management Log
has been reinitialized, probably
due to corruption of the log.
Event message, no action
needed.
201-Memory Error
None
RAM failure detected
Run Diagnostics. Replace failed
assembly as indicated.
202-Memory Type
Mismatch
2 short
An incompatible memory module
is installed in the system.
Compare Compaq part numbers
from installed memory modules
with the manual.
If not listed, the memory
modules are incompatible and
should be replaced or removed.
203-Memory
Address Error
None
RAM failure detected
Run Diagnostics. Replace failed
assembly as indicated.
207-ECC Corrected
Single Bits Errors in
DIMM in Memory
Module Socket
2 short
A memory module is
malfunctioning.
Run Compaq Diagnostics.
Replace or remove
malfunctioning memory module
as indicated.
207-Invalid Memory
Configuration -
Check DIMM
Installation
None
Memory module installed
incorrectly
Verify placement of memory
modules.
208-Invalid Memory
Speed - Check DIMM
Installation
1 long, 1 short
The speed of the memory is not
compatible.
Verify the speed of the memory
modules installed, then check
your server user documentation
and replace as indicated.
209-Memory
Detection Failure -
Check Memory
Installation
1 long, 1 short
Unable to size memory
Check memory module
installation. If error persists, call
Compaq authorized service
provider.
211 Invalid Voltage
Regulator Module
installed for
Processor X
None
Non-redundant Processor Power
Module (PPM) installed in
indicated processor slot.
Replace with a PPM that
supports redundancy.
212-System
Processor Failed/
Mapped out
1 short
Processor in slot X failed
Run Compaq Diagnostics and
replace failed processor.
214-Processor PPM
Failed Module X
None
Indicated Processor Power
Module (PPM) failed.
Replace failed PPM assembly as
indicated.
215-Non-functioning
Voltage Regulator
Module for
Processors
None
Indicated Processor Power
Module PPM (DC-DC Converter)
has failed or lost redundancy.
Run Compaq Diagnostics.
Replace failed assembly if
necessary
continued