Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 78
Internal Battery
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Removal and Replacement Procedures 2-55 Internal Battery To remove the internal battery: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Open the top access panel. See "Top Access Panel" earlier in this chapter. 3. Locate the battery on the I/O board behind slots 10 and 11. 4. Pull the battery out of the battery socket . CAUTION: Replace the battery within 15 minutes of removal to avoid data loss. 1 2 Figure 2-49. Removing the internal battery (fan guide and other plastics not shown) Reverse steps 1 through 4 to replace the battery . CAUTION: Loss of BIOS settings will occur if the lithium battery is removed. BIOS settings must be reconfigured whenever the battery is replaced. CAUTION: Batteries, battery packs, and accumulators should not be disposed of together with the general household waste. In order to forward them to recycling or proper disposal, please use the public collection system or return them to Compaq, your authorized Compaq Partners, or their agents.