D-Link DES-3026 Reference Manual - Page 102
show cos mapping, config dscp_mapping, Port priority
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual show cos mapping Purpose Used to show CoS mapping. Syntax show cos mapping {port | all } Description The show cos mapping displays information regarding CoS mapping enabled ports and their mapping method. Parameters portlist − Specified a range of ports to be displayed. If no parameter specified, all ports priority settings will be shown. Restrictions None. To display CoS mapping configuration: DES-3026:4#show cos mapping port 1-3 Command: show cos mapping port 1-3 Port Port priority Ethernet_priority IP_priority 1 off 802.1p off 2 off 802.1p off 3 off 802.1p off DES-3026:4# config dscp_mapping Purpose To configure CoS mapping for DSCP (DiffServ) based priority. Syntax config dscp_mapping dscp_value [class ] Description This is used to map the 64-level DSCP priority to the 4-level class of service priority used in the Switch. Parameters dscp_value - The DSCP priority level being mapped. Each DSCP level must be configured separately to be mapped. class - The class of service level being mapped to. Restrictions Only administrator-level users can issue this command. To configure CoS mapping for DSCP: DES-3026:4#config dscp_mapping dscp_value 1 class 0 Command: config dscp_mapping dscp_value 1 class 0 Success DES-3026:4# 98