D-Link DES-3026 Reference Manual - Page 58
Download/Upload Commands, download - switch configuration
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual 8 DOWNLOAD/UPLOAD COMMANDS The download/upload commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters download upload enable autoconfig disable autoconfig show autoconfig [firmware | configuration {increment}] [configuration | log] Each command is listed, in detail, in the following sections. download Purpose Syntax Description Parameters Restrictions Example usage: Used to download and install new firmware or a switch configuration file from a TFTP server. download [firmware | configuration {increment}] This command is used to download a new firmware or a switch configuration file from a TFTP server. firmware − Download and install new firmware on the Switch from a TFTP server. configuration − Download a switch configuration file from a TFTP server. − The IP address of the TFTP server. − The DOS path and filename of the firmware or switch configuration file on the TFTP server. For example, C:\3024.had. increment − Allows the download of a partial switch configuration file. This allows a file to be downloaded that will change only the Switch parameters explicitly stated in the configuration file. All other switch parameters will remain unchanged. Only administrator-level users can issue this command. To download a firmware file: DES-3026:4#download firmware 10.48.74.121 c:\DES-3026 b08.had Command: download firmware 10.48.74.121 c:\DES-3026 b08.had Connecting to server Done. Download firmware Done. Do not power off! Please wait, programming flash........ Done. Saving current settings to NV-RAM......Done. Please wait, the switch is rebooting.... 54