D-Link DES-3026 Reference Manual - Page 138
config address_binding ip_mac ports
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual config address_binding ip_mac ports Purpose Used to enable ports on the Switch to be configured for IP-MAC address binding. Syntax config address_binding ip_mac ports [ | all] state [enable | disable] Description This command will configure ports as enabled or disabled for the IP-MAC address binding function. Parameters − Specifies a port or range of ports to be enabled or disabled for IP-MAC address binding. all - Specifies all ports on the Switch are to be enabled or disabled for IP-MAC address binding. State - [enable | disable] - Enables or disables the specified range of ports for IP-MAC address binding. Restrictions Only administrator-level users can issue this command. Example usage: To configure port 2 to be enabled for IP-MAC address bindings: DES-3026:4#config address_binding ip_mac ports 2 state enable Command: config address_binding ip_mac ports 2 state enable Success. DES-3026:4# 134