D-Link DES-3026 Reference Manual - Page 149
config router_ports, Command: config router_ports default add 1-10
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual Command: config igmp_snooping querier vlan_name default query_interval 125 state enable Success. DES-3026:4# config router_ports Purpose Used to configure ports as router ports. Syntax config router_ports [add | delete] Description This command allows you to designate a range of ports as being connected to multicast-enabled routers. This will ensure that all packets with such a router as its destination will reach the multicast-enabled router − regardless of protocol, etc. Parameters − The name of the VLAN on which the router port resides. [add | delete] - Specify whether to add or delete ports defined in the following parameter , to the router port function. − Specifies a port or range of ports that will be configured as router ports. Restrictions Only administrator-level users can issue this command. Example usage: To set up static router ports: DES-3026:4#config router_ports default add 1-10 Command: config router_ports default add 1-10 Success. DES-3026:4# 145