D-Link DES-3026 Reference Manual - Page 18
show config, show serial_port, CTRL+C ESC q Quit SPACE n Next ENTER Next Entry a All - configure
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual show config Purpose Syntax Description Parameters Restrictions Used to display a list of configuration commands entered into the Switch. show config [current_config | config_in_nvram] This command displays a list of configuration commands entered into the Switch. current_config - Entering this parameter will display configurations entered without being saved to NVRAM. config_in_nvram - Entering this parameter will display configurations entered and saved to NVRAM. Only administrator-level users can issue this command. Example usage: To view configurations entered on the Switch that were saved to the DRAM: DES-3026:4# show config config_in_nvram Command: show config config_in_nvram # BASIC config serial_port baud_rate 9600 auto_logout never enable telnet 23 enable web 80 enable clipaging # STORM config traffic control 1-16 broadcast disable multicast disable dlf disable threshold 128 CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All show serial_port Purpose Used to display the current serial port settings. Syntax show serial_port Description This command displays the current serial port settings. Parameters None. Restrictions None. Example usage: To display the serial port setting: 14