D-Link DES-3026 Reference Manual - Page 189
config sntp, config sntp {primary <ipaddr> | secondary <ipaddr> | poll-interval <int
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual config sntp Purpose Syntax Description Parameters Restrictions Used to setup SNTP service. config sntp {primary | secondary | poll-interval } Use this command to configure SNTP service from an SNTP server. SNTP must be enabled for this command to function (See enable sntp). primary − This is the primary server the SNTP information will be taken from. − The IP address of the primary server. secondary − This is the secondary server the SNTP information will be taken from in the event the primary server is unavailable. − The IP address for the secondary server. poll-interval − This is the interval between requests for updated SNTP information. − The polling interval ranges from 30 to 99,999 seconds. The default setting is 720 seconds. Only administrator-level users can issue this command. SNTP service must be enabled for this command to function (enable sntp). Example usage: To configure SNTP settings: DES-3026:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30 Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30 Success. DES-3026:4# 185