D-Link DES-3026 Reference Manual - Page 32
Command, Parameters, create snmp user <SNMPname 32> <groupname 32> {encrypted
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual Command delete snmp group show snmp groups create snmp host delete snmp host show snmp host enable rmon disable rmon create trusted_host delete trusted_host show trusted_host enable snmp traps disable snmp traps enable snmp authenticate traps disable snmp authenticate traps show snmp traps config snmp system_contact config snmp system_location config snmp system_name Parameters auth_priv]] {read_view | write_view | notify_view } [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]] {} Each command is listed, in detail, in the following sections. create snmp user Purpose Used to create a new SNMP user and adds the user to an SNMP group that is also created by this command. Syntax create snmp user {encrypted [by_password auth [md5 | sha ] priv [none | des ] | by_key auth [md5 | sha ] priv [none | des ]]} Description The create snmp user command creates a new SNMP user and adds the user to an SNMP group that is also created by this command. Parameters − An alphanumeric name of up to 32 characters that will identify the new SNMP user. − An alphanumeric name of up to 32 characters 28