D-Link DES-3026 Reference Manual - Page 12
Command Syntax, <angle brackets>, square brackets], vertical bar - user manual
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual 3 COMMAND SYNTAX The following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the CLI and available through the console interface uses the same syntax. Note: All commands are case-sensitive. Be sure to disable Caps Lock or any other unwanted function that changes text case. Purpose Encloses a variable or value that must be specified. Syntax config ipif [System] [{ipaddress | vlan | state [enable | disable]} | bootp | dhcp] Description In the above syntax example a VLAN name must be specified in the space and the network address in the space. Do not type the angle brackets. Example Command config ipif System ipaddress 10.24.22.5/255.0.0.0 vlan Design state enable [square brackets] Purpose Encloses a required value or set of required arguments. One value or argument can be specified. Syntax create account [admin | user] Description In the above syntax example, an admin or a user level account must be specified to be created. Do not type the square brackets. Example Command create account admin Darren | vertical bar Purpose Separates two or more mutually exclusive items in a list, one of which must be entered. Syntax show multicast_fdb {vlan | mac_address } Description In the above syntax example, either a VLAN, or a MAC address must be specified to show multicast FDB entries. Do not type the vertical bar. Example Command show multicast_fdb {vlan | mac_address } 8