D-Link DES-3026 Reference Manual - Page 150
enable igmp_snooping, Command: enable igmp_snooping
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual enable igmp_snooping Purpose Used to enable IGMP snooping on the Switch. Syntax enable igmp_snooping {forward_mcrouter_only} Description This command allows you to enable IGMP snooping on the Switch. If forward_mcrouter_only is specified, the Switch will only forward all multicast traffic to the multicast router, only. Otherwise, the Switch forwards all multicast traffic to any IP router. Parameters forward_mcrouter_only − Specifies that the Switch should only forward all multicast traffic to a multicast-enabled router. Otherwise, the Switch will forward all multicast traffic to any IP router. Restrictions Only administrator-level users can issue this command. Example usage: To enable IGMP snooping on the Switch: DES-3026:4#enable igmp_snooping Command: enable igmp_snooping Success. DES-3026:4# disable igmp_snooping Purpose Used to disable IGMP snooping on the Switch. Syntax disable igmp_snooping Description This command disables IGMP snooping on the Switch. IGMP snooping can be disabled only if IP multicast routing is not being used. Disabling IGMP snooping allows all IGMP and IP multicast traffic to flood within a given IP interface. Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To disable IGMP snooping on the Switch: DES-3026:4#disable igmp_snooping Command: disable igmp_snooping Success. DES-3026:4# 146