D-Link DES-3026 Reference Manual - Page 54
enable smtp, disable smtp command, DES-3026:4#enable smtp, Command: enable smtp, Success., DES-3026:4
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual • If the initial message sent to a mail recipient is not delivered, it will be placed in the waiting queue until its place in the queue has been reached, and then another attempt to transmit the message is made. • The maximum attempts for delivering mail to recipients is three. Mail message delivery attempts will be tried every five minutes until the maximum number of attempts is reached. Once reached and the message has not been successfully delivered, the message will be dropped and not received by the mail recipient. • If the Switch shuts down or reboots, mail messages in the waiting queue will be lost. The SMTP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters enable smtp disable smtp config smtp {server | server_port | self_mail_addr | [add mail_receiver | delete mail_receiver ]} show smtp smtp send_testmsg Each command is listed, in detail, in the following sections. enable smtp Purpose Syntax Description Parameters Restrictions Used to enable the Switch as a SMTP client. enable smtp This command, in conjunction with the disable smtp command will enable and disable the Switch as a SMTP client without changing configurations. None. Only administrator-level users can issue this command. Example usage: To enable SMTP on the Switch. DES-3026:4#enable smtp Command: enable smtp Success. DES-3026:4# 50