D-Link DES-3026 Reference Manual - Page 21
enable telnet, disable telnet, enable web - switch des
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual enable telnet Description This command is used to enable the Telnet protocol on the Switch. The user can specify the TCP or UDP port number the Switch will use to listen for Telnet requests. Parameters − The TCP port number. TCP ports are numbered between 1 and 65535. The "well-known" TCP port for the Telnet protocol is 23. Restrictions Only administrator-level users can issue this command. Example usage: To enable Telnet and configure port number: DES-3026:4#enable telnet 23 Command: enable telnet 23 Success. DES-3026:4# disable telnet Purpose Used to disable the Telnet protocol on the Switch. Syntax disable telnet Description This command is used to disable the Telnet protocol on the Switch. Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To disable the Telnet protocol on the Switch: DES-3026:4#disable telnet Command: disable telnet Success. DES-3026:4# enable web Purpose Syntax Description Parameters Restrictions Example usage: Used to enable the HTTP-based management software on the Switch. enable web {} This command is used to enable the Web-based management software on the Switch. − The TCP port number. TCP ports are numbered between 1 and 65535. The "well-known" port for the Web-based management software is 80. Only administrator-level users can issue this command. 17