D-Link DES-3026 Reference Manual - Page 124
config vlan, show vlan, delete] <portlist>}
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual To remove a vlan v1: DES-3026:4#delete vlan v1 Command: delete vlan v1 Success. DES-3026:4# config vlan Purpose Syntax Description Parameters Restrictions Used to add additional ports to a previously configured VLAN. config vlan {[add [tagged | untagged] | delete] } This command allows the user to add or delete ports to the port list of a previously configured VLAN. Additional ports may be specified as tagging or untagging. The default is to assign the ports as untagged. − The name of the VLAN to which to add ports. add − Specifies to add ports to a previously created vlan. delete - Specifies to delete ports to a previously created vlan. tagged − Specifies the additional ports as tagged. untagged − Specifies the additional ports as untagged. − A port or range of ports to be added to or deleted from the VLAN. Only administrator-level users can issue this command. Example usage: To add ports 4 through 8 as tagged ports to the VLAN v1: DES-3026:4#config vlan v1 add tagged 4-8 Command: config vlan v1 add tagged 4-8 Success. DES-3026:4# show vlan Purpose Syntax Description Parameters Restrictions Used to display the current VLAN configuration on the Switch show vlan {} This command displays summary information about each VLAN including the VLAN ID, VLAN name, the Tagging/Untagging status, and the Member/Non-member status of each port that is a member of the VLAN. − The VLAN name of the VLAN for which to display a summary of settings. None. 120