D-Link DES-3026 Reference Manual - Page 165
config port_security ports, DES-3026:4#config port_security ports 1-5 admin_state enable - reset des
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual config port_security ports Purpose Used to configure port security settings. Syntax config port_security ports [ | all ] {admin_state [enable | disable] | max_learning_addr | lock_address_mode [Permanent | DeleteOnTimeout | DeleteOnReset]} Description This command allows for the configuration of the port security feature. Only the ports listed in the are effected. Parameters ports − Specifies a port or range of ports to be configured for port security. all − Configure port security for all ports on the Switch. admin_state [enable | disable] - Enable or disable port security for the listed ports. max_learning_addr - Use this to limit the number of MAC addresses dynamically listed in the FDB for the ports. lock_address_mode [Permanent | DeleteOnTimeout | DeleteOnReset] - Indicates the method of locking addresses. The user has three choices: Permanent - The locked addresses will not age out after the aging timer expires. DeleteOnTimeout - The locked addresses will age out after the aging timer expires. DeleteOnReset - The locked addresses will not age out until the Switch has been reset. Restrictions Only administrator-level users can issue this command. Example usage: To configure the port security: DES-3026:4#config port_security ports 1-5 admin_state enable max_learning_addr 5 lock_address_mode DeleteOnReset Command: config port_security ports 1-5 admin_state enable max_learning_addr 5 lock_address_mode DeleteOnReset Success DES-3026:4# 161