D-Link DES-3026 Reference Manual - Page 126
Link Aggregation Commands - des d link
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual 17 LINK AGGREGATION COMMANDS The link aggregation commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters create link_aggregation group_id {type [lacp | static]} delete link_aggregation group_id config link_aggregation group_id {master_port | ports | state [enable | disable]} config link_aggregation [mac_source | mac_destination | mac_source_dest] algorithm show link_aggregation {group_id | algorithm} config lacp_port mode [active | passive] show lacp_port {} Each command is listed, in detail, in the following sections. 122
DES-3000 Series Layer 2 Switch CLI Reference Manual
17
L
INK
A
GGREGATION
C
OMMANDS
The link aggregation commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
Parameters
create link_aggregation
group_id <value 1-3> {type [lacp | static]}
delete link_aggregation
group_id <value 1-3>
config link_aggregation
group_id <value 1-3> {master_port <port> | ports <portlist> | state
[enable | disable]}
config link_aggregation
algorithm
[mac_source | mac_destination | mac_source_dest]
show link_aggregation
{group_id <value 1-3> | algorithm}
config lacp_port
<portlist> mode [active | passive]
show lacp_port
{<portlist>}
Each command is listed, in detail, in the following sections.
122