D-Link DES-3026 Reference Manual - Page 114
config cos mac_mapping destination_addr, show cos mac_mapping
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual config cos mac_mapping destination_addr Purpose Used to map the destination MAC address of an incoming packet to one of the hardware queues available on the Switch. Syntax config cos mac_mapping destination_addr [class ] Description Use this command to map a static destination MAC address to one of the four hardware queues on the Switch. The static MAC address must exist in the Switch forwarding database in order to use this command. See the command create fdb port for an example of how to create a static entry in the FDB. Parameters - Specify the static destination MAC address to be mapped to a harware queue. class - Specify the hardware queue to which the MAC address is mapped. Restrictions Only administrator-level users can issue this command. Example usage: To map a static MAC address to hardware queue 3: DES-3026:4#config cos mac_mapping destination_addr 01-00-D6-E4-FF-05 class 3 Command: config cos mac_mapping destination_addr 01-00-D6-E4-FF-05 class 3 Success! DES-3026:4# show cos mac_mapping Purpose Used to display MAC address CoS mapping configuration. Syntax show cos mac_mapping { destination_addr < macaddr > } Description Use this command to view a single entry or all entries configured for CoS MAC address mapping. Parameters destination_addr < macaddr > - Specify a static MAC address entry to view the current CoS mapping configuration. If no entry specified, all MAC mapping entries are listed. Restrictions None. 110