D-Link DES-3026 Reference Manual - Page 160
config cpu access_profile
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual config cpu access_profile ip − Specifies that the Switch will look into the IP fields in each packet. • vlan − Specifies that the access profile will apply to only this VLAN. • source_ip − Specifies that the access profile will apply to only packets with this source IP address. • destination_ip − Specifies that the access profile will apply to only packets with this destination IP address. • dscp − Specifies that the access profile will apply only to packets that have this value in their Type-of-Service (DiffServ code point, DSCP) field in their IP packet header • icmp − Specifies that the Switch will examine the Internet Control Message Protocol (ICMP) field within each packet. • type − Specifies that the access profile will apply to this ICMP type value. • code − Specifies that the access profile will apply to this ICMP code. • igmp − Specifies that the Switch will examine the Internet Group Management Protocol (IGMP) field within each packet. • type − Specifies that the access profile will apply to packets that have this IGMP type value. • tcp − Specifies that the Switch will examine the Transmission Control Protocol (TCP) field within each packet. • src_port − Specifies that the access profile will apply only to packets that have this TCP source port in their TCP header. • dst_port − Specifies that the access profile will apply only to packets that have this TCP destination port in their TCP header. • protocol_id − Specifies that the switch will examine the Protocol field in each packet and if this field contains the value entered here, apply the following rules. • udp − Specifies that the Switch will examine the Transmission Control Protocol (TCP) field within each packet. • src_port − Specifies that the access profile will apply only to packets that have this UDP source port in their header. • dst_port − Specifies that the access profile will apply only to packets that have this UDP destination port in their header. • protocol_id − Specifies that the Switch will examine the protocol field in each packet and if this field contains the value entered here, apply the following rules. • user_define_mask − Specifies that the rule applies to the IP protocol ID and the mask options behind the IP header. 156