D-Link DES-3026 Reference Manual - Page 147
config igmp_snooping, Last Member Query Timer when an IGMP Leave Report Packet is received
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual config igmp_snooping Purpose Used to configure IGMP snooping on the Switch. Syntax config igmp_snooping [vlan_name | all] {host_timeout | router_timeout | leave_timer | state [enable | disable] | fast_leave [enable | disable]} Description This command allows the user to configure IGMP snooping on the Switch. Parameters vlan_name − The name of the VLAN for which IGMP snooping is to be configured. all - Selecting this parameter will configure IGMP for all VLANs on the Switch. host_timeout − Specifies the maximum amount of time a host can be a member of a multicast group without the Switch receiving a host membership report. The default is 260 seconds. router_timeout − Specifies the maximum amount of time a route can be a member of a multicast group without the Switch receiving a host membership report. The default is 260 seconds. leave_timer − Leave timer. The default is 2 seconds. state [enable | disable] − Allows the user to enable or disable IGMP snooping for the specified VLAN. fast_leave [enable | disable] - This parameter allows the user to enable the fast leave function. Enabled, this function will allow members of a multicast group to leave the group immediately (without the implementation of the Last Member Query Timer) when an IGMP Leave Report Packet is received by the Switch. Restrictions Only administrator-level users can issue this command. Example usage: To configure the igmp snooping: DES-3026:4#config igmp_snooping vlan_name default host_timeout 250 state enabled Command: config igmp_snooping vlan_name default host_timeout 250 state enabled Success. DES-3026:4# 143