D-Link DES-3026 Reference Manual - Page 40
create snmp group, Specifies that authorization will be required, but there
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual create snmp group table that maps SNMP users to SNMP views. Parameters − An alphanumeric name of up to 32 characters that will identify the SNMP group with which the new SNMP user will be associated. v1 - Specifies that SNMP version 1 will be used. The Simple Network Management Protocol (SNMP), version 1, is a network management protocol that provides a means to monitor and control network devices. v2c - Specifies that SNMP version 2c will be used. The SNMP v2c supports both centralized and distributed network management strategies. It includes improvements in the Structure of Management Information (SMI) and adds some security features. v3 - Specifies that the SNMP version 3 will be used. SNMP v3 provides secure access to devices through a combination of authentication and encrypting packets over the network. SNMP v3 adds: Message integrity − Ensures that packets have not been tampered with during transit. Authentication − Determines if an SNMP message is from a valid source. Encryption − Scrambles the contents of messages to prevent it being viewed by an unauthorized source. noauth_nopriv − Specifies that there will be no authorization and no encryption of packets sent between the Switch and a remote SNMP manager. auth_nopriv − Specifies that authorization will be required, but there will be no encryption of packets sent between the Switch and a remote SNMP manager. auth_priv − Specifies that authorization will be required, and that packets sent between the Switch and a remote SNMP manger will be encrypted. read_view - Specifies that the SNMP group being created can request SNMP messages. − An alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that a remote SNMP manager is allowed to access on the Switch. write_view - Specifies that the SNMP group being created has write privileges. − An alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that a remote SNMP manager is allowed to access on the Switch. notify_view − Specifies that the SNMP group being created can receive SNMP trap messages generated by the Switch's SNMP agent. 36