D-Link DES-3026 Reference Manual - Page 127
create link_aggregation, delete link_aggregation group_id, group_id 3 - des module
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual create link_aggregation Purpose Used to create a link aggregation group on the Switch. Syntax create link_aggregation group_id {type [lacp | static]} Description This command will create a link aggregation group with a unique identifier. Parameters − Specifies the group ID. The Switch allows up to 3 link aggregation groups to be configured. The group number identifies each of the groups. group_id 3 is designed for the uplink modules only (the last two ports on the Switch (9-10, 17-18, 25-26) and can only be configured for them. type - Specify the type of link aggregation used for the group. If the type is not specified the default type is static. lacp - This designates the port group as LACP compliant. LACP allows dynamic adjustment to the aggregated port group. LACP compliant ports may be further configured (see config lacp_ports). LACP compliant must be connected to LACP compliant devices. static - This designates the aggregated port group as static. Static port groups can not be changed as easily as LACP compliant port groups since both linked devices must be manually configured if the configuration of the trunked group is changed. If static link aggregation is used, be sure that both ends of the connection are properly configured and that all ports have the same speed/duplex settings. Restrictions Only administrator-level users can issue this command. Example usage: To create a link aggregation group: DES-3026:4#create link_aggregation group_id 1 Command: create link_aggregation group_id 1 Success. DES-3026:4# delete link_aggregation group_id Purpose Used to delete a previously configured link aggregation group. Syntax delete link_aggregation group_id Description This command is used to delete a previously configured link aggregation group. Parameters − Specifies the group ID. The Switch allows up to 3 link aggregation groups to be configured. The group number identifies each of the groups. group_id 3 is designed for the uplink modules only (the last two ports on the Switch (9-10, 17-18, 25-26) and can only be configured for them. Restrictions Only administrator-level users can issue this command. 123