D-Link DES-3026 Reference Manual - Page 63
Network Monitoring Commands
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual 9 NETWORK MONITORING COMMANDS The network monitoring commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command show packet ports show error ports show utilization clear counters clear log show log enable syslog disable syslog show syslog create syslog host config syslog delete syslog host show syslog host config log_save_timing show log_save_timing Parameters [cpu | ports {}] {ports } {index } {severity [informational | warning | all] | facility [local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7] | udp_port | ipaddress state [enable | disable]} {host [all ]} {severity [informational | warning | all] | facility [local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7] | udp_port | ipaddress | state [enable | disable]} [ | all] {} [time_interval | on_demand | log_trigger] Each command is listed, in detail, in the following sections. 59