Dell C3760DN Color Laser User Manual - Page 195
Network, Color, Black, 10BASE- T Half, Connection, Acceptable, No Reception
View all Dell C3760DN Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Default Color Purpose: To specify the color mode to Color or Black. This setting is used for a print job which does not specify a print mode. Values: Color* Black Prints in the color mode. Prints in the black and white mode. Network Use the Network menu to change the printer settings affecting jobs sent to the printer through the wired or wireless network. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Ethernet Purpose: To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the printer is turned off and then on again. Values: Auto* 10BASE- T Half 10BASE- T Full 100BASE- TX Half 100BASE- TX Full 1000BASE- T Full Detects the Ethernet settings automatically. Uses 10BASE-T Half-duplex. Uses 10BASE-T Full-duplex. Uses 100BASE-TX Half-duplex. Uses 100BASE-TX Full-duplex. Uses 1000BASE-T Full-duplex. Wireless Status NOTE: Wireless Status feature is available only when the printer is connected using the wireless network. Purpose: To confirm the wireless communication status. Values: Connection SSID Enc. (Good) (Acceptable) (Low) (No Reception) Displays the name that identifies the wireless network. Displays the encryption type. Wireless Setup NOTE: Wireless Setup is available only when the printer is connected using the wireless network. Purpose: To configure the wireless network interface. Understanding the Printer Menus 193