Dell C3760DN Color Laser User Manual - Page 201

Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum warm-up time. Select a value between 1 and 60 minutes for power saver mode if you want a balance between energy consumption and a shorter warm-up period. The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer. You can also change the status of the printer to the standby mode by pressing any button on the operator panel. If the Auto-Off Timer feature turns off the printer, the printer cannot be turned back on automatically. To turn the printer back on, physically turn the power switch of the printer to On. Auto Reset Purpose: To automatically reset the settings to the default settings and return to the standby mode after you do not specify any settings for the specified time. Values: 45sec* 1min 2min 3min 4min Fault Time-out Purpose: To specify the amount of time the printer waits before canceling a job that stops abnormally. The print job is cancelled if the time-out time is exceeded. Values: Off On* 60 seconds* Available Range: 3-300 seconds Disables the fault time-out. Sets the amount of time the printer waits before canceling a job that stops abnormally. Job Time-out Purpose: To specify the amount of time the printer waits for data to arrive from the computer. The print job is cancelled if the time-out time is exceeded. Values: Off On* 30 seconds* Available Range: 5-300 seconds Disables the job time-out. Sets the time the printer waits for data to arrive from the computer. Understanding the Printer Menus 199