Dell Inspiron 530S Owner's Manual - Page 166
Processor, Removing the Processor
View all Dell Inspiron 530S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Processor CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. Removing the Processor 1 Follow the procedures in "Before You Begin" on page 103. 2 Remove the computer cover (see "Removing the Computer Cover" on page 105). CAUTION: Despite having a plastic shield, the heat sink assembly may be very hot during normal operation. Be sure that it has had sufficient time to cool before you touch it. 3 Remove the processor fan/heat sink assembly from the computer (see "Removing the Processor Fan/Heat Sink Assembly" on page 164). NOTICE: Unless a new heatsink is required for the new processor, reuse the original heat sink fan assembly when you replace the processor. 4 At the processor, place your finger upon the hook end of the release lever, then push down and out to release it from the tab that secures it. 1 2 3 4 1 processor cover 3 socket 2 processor 4 release lever 166 Removing and Installing Parts