Epson Stylus Pro 7800 Professional Edition Printer Guide - Page 128

128 | Maintaining and Transporting the Printer Caution: To ensure good results, use genuine Epson ink cartridges and do not refill them. Other products may cause damage not covered by Epson's warranty. Caution: Leave the empty cartridge in the printer until you are ready to replace it. To prevent ink reporting errors, never replace the ink cartridges with the printer turned off. When the red B ink light is flashing (and INK LOW appears on the LCD display), the indicated cartridge is almost out of ink. Make sure you have a replacement cartridge. When the light stays on and INK OUT is displayed, the cartridge is empty. You must replace the cartridge before you can continue printing. You can install any combination of 110 ml and 220 ml cartridges. Use the following UltraChrome K3 Epson ink cartridges: Slot no. 1 2 3 4 5 6 7 8 Cartridge Light Light Black Light Magenta Light Cyan Light Black Photo Black Matte Black Cyan Magenta Yellow 110 ml T562900 T562600 T562500 T562700 T562100 T566800 T562200 T562300 T562400 220 ml T563900 T563600 T563500 T563700 T563100 T567800 T563200 T563300 T563400 You can purchase genuine Epson ink and paper from an authorized Epson reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). In the U.S., you can also purchase online at www.epsonstore.com. In Canada, you can also purchase at www.epson.ca or 800-807-7766. Before you start, make sure the printer is powered on. Then follow these steps to replace an ink cartridge: 1. Note the color of the cartridge that is low or empty. This is the cartridge you need to replace. 5-128