Epson Stylus Pro 7800 Professional Edition Printer Guide - Page 151
Solving Problems, Message, Explanation, Response
View all Epson Stylus Pro 7800 Professional Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Solving Problems | 151 Message Explanation Response COMMAND ERROR CHECK DRIVER SETTINGS You may be using the wrong printer driver. Damaged data was sent to the printer or the data has an incorrect command. Press and hold the Pause button for 3 seconds to cancel the print job. Make sure you installed the correct driver for your printer. The driver's ink type configuration is not correct for the ink in the printer. CONVERSION CRTG LIFE CONVERSION CRTG NEAR END OF SERVICE LIFE The conversion cartridge will need to be replaced soon. (Remaining service life is displayed on the LCD) Press the Pause button to continue. CONVERSION CRTG LIFE REPLACE CONVERSION CRTG WITH A NEW ONE The conversion cartridge needs Replace the conversion cartridge with a new to be replaced. one. Or, complete the replacement of black ink by pressing the Pause button. COVER OPEN Front cover is open. Close the front cover. CLOSE COVER F/W INSTALL ERROR UPDATE FAILED RESTART THE PRINTER Firmware update failed. Restart the printer, then update the firmware again; see page 50 for instructions. I/F CARD ERROR CHECK CARD TYPE Wrong interface card installed. Turn off the printer and remove the card. See the documentation that came with the card. INK CARTRIDGE ERROR BK INK CHANGE The black ink cartridge needs to Select YES to switch the black ink cartridge, or be changed. NO to continue using the installed black ink cartridge. INK CARTRIDGE ERROR CHECK CARTRIDGE You tried to install the wrong ink cartridge. If you are replacing ink cartridges, check the package and product code. You must use the ink cartridges designed for your printer. Other cartridges will not work. INK CARTRIDGE ERROR INSTALL CORRECT CARTRIDGE The wrong black ink cartridge is Install the correct black ink cartridge, or press selected (Matte or Photo). the Pause button and change the ink setting; see page 132. You tried to install an ink cartridge that cannot be used with this printer. If you are replacing ink cartridges, check the package and product code. You must use the ink cartridges designed for your printer. Other cartridges will not work. 6-151