Epson Stylus Pro 7800 Professional Edition Printer Guide - Page 146
Removing the Optional Print Server Card, remove the Ethernet card.
View all Epson Stylus Pro 7800 Professional Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
146 | Maintaining and Transporting the Printer WARNING: The Stylus Pro 7800 weighs about 131 lb (59 kg) and should be lifted by two people. 7. Lift the printer using the hand grips where provided. (See the stickers located near the rear hand grips for the correct holding position.) The Stylus Pro 9800 weighs about 198 lb (90 kg) and should be lifted by four people. Stylus Pro 7800 Stylus Pro 9800 8. Keep the printer level while moving it. See page 148 for information about setting up the printer after transporting it. To ship the printer a longer distance, you should repack it using the original box and packing materials. If you don't have the original packaging, you can purchase replacement packaging from Epson. See page 11 for more information. Removing the Optional Print Server Card If you need to exchange your printer or ship it to Epson for repairs, you must remove the Ethernet card. WARNING: The card will be hot after printing. Make sure you allow the card to cool before handling it. 1. Turn off the printer and disconnect the power cord. 2. Disconnect the Ethernet cable. 3. Remove the two screws securing the card. 4. Make sure the card is cool before pulling it out of the slot. 5-146