Garmin aera 796 Pilot's Guide - Page 156
Attaching the aera landscape orientation to the yoke mount, Removing the aera from the yoke mount - cradle
View all Garmin aera 796 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Overview GPS Navigation Additional Features Hazard Avoidance Flight Planning Appendix D Connecting the cable: Make all applicable cable connections per the following figure. Attaching the aera (portrait orientation) to the yoke mount: 1) Fit the left side of the aera into the cradle. 2) Press the right side of the aera into the cradle until it snaps into place. Attaching the aera (landscape orientation) to the yoke mount: 1) Fit the bottom of the aera into the cradle. 2) Tilt the aera back until it snaps into place. Removing the aera from the yoke mount: 1) Press the Release Button on the side of the cradle to release the aera. 2) Remove the aera from the cradle. Removing the yoke mount from the yoke shaft (or control arm): 1) Disconnect the power plug, audio jack, and mini-USB connector (if applicable). 2) Loosen the clamp by turning the Clamp Adjustment Knob until the yoke mount assembly can be easily removed from the yoke shaft or control arm. Appendices Index 142 Garmin aera 795/796 Pilot's Guide 190-01194-00 Rev. A