HP 2600n Service Manual - Page 132

Table 6-5 Status log messages (continued) Error log code 54.2801 55.0000 55.0001 55.1000 57.0000 57.0001 59.0000 59.0001 101.0000 102.0000 103.0000 Description Sensor color plane registration contaminated Engine comm fatal error Engine comm critical error DC controller memory error Fan motor error Fan cartridge failure Paper path/ETB rotation failure Paper path/ETB ramp up failure Color plane registration error DMAX calibration error DHALF calibration error Service menu settings The service menu is used to calibrate, restore factory default settings, and clean the print paper path. The following service menu items are available: ■ Restore defaults-used to reset all customer-accessible menu settings back to the factory default settings (except language) via the control panel or software NOTE This service menu item does not reset factory-settable settings, including formatter number, page counts, factory paper settings, language, and so on. ■ PowerSave-used to configure the amount of idle time before the engine enters sleep mode ■ Cleaning mode-used to remove dust and toner from the print paper path Secondary service menu The secondary service menu is intended for use by manufacturing engineers, service engineers, developers, and support personnel. This menu provides options to perform various tests and print out special reports. 118 Chapter 6 Troubleshooting ENWW