HP 2600n Service Manual - Page 36

Site preparation Below are recommendations for the printer location and placement. Operating environment The printer must be kept in a proper location to maintain the performance level that has been set at the factory. In particular, be sure that the environment adheres to the specifications listed in this chapter. The printer must have 2 inches of space above and around it. Figure 2-1 Printer dimensions 1 Front view 2 Side view Make sure the printer has the following: ■ A well-ventilated, dust-free area ■ As surface that will support up to 18 kg (40 lbs) ■ A constant temperature and humidity (Do not install near water sources, humidifiers, air conditioners, refrigerators, or other major appliances.) ■ A hard level surface (not more than a 2° angle) Make sure to keep the printer away from the following: ■ Direct sunlight, dust, open flames, or water ■ Direct flow of exhaust from air ventilation systems ■ Magnets and devices that emit a magnetic field ■ Areas subject to vibration 22 Chapter 2 Installation ENWW