HP 2600n Service Manual - Page 80
ETB removal and replacement, thorough cleaning, see
UPC - 829160809366
View all HP 2600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
7 Firmly close the front door. After a short time, the control panel should display Ready. NOTE If a cartridge is in the wrong slot or is the wrong type for the printer, the control panel will display one of the following messages: Incorrect yellow, Incorrect magenta, Incorrect cyan, or Incorrect black. 8 Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived. See the enclosed recycling guide for recycling instructions. 9 If you are using a non-HP print cartridge, check the printer control panel for further instructions. NOTE When replacing or changing a black print cartridge, a cleaning page will automatically print. This helps prevent speckles on the front or back of printed documents. For a more thorough cleaning, see Cleaning the printer. ETB removal and replacement Use the following procedure to remove the ETB (RM1-1881-000CN). 1 Remove or slightly pull out Tray 2 (RM1-1916-000CN). 66 Chapter 5 Removal and replacement ENWW