HP 2600n Service Manual - Page 31

Labels Select the type of label that you are using from the Print dialog box or the printer driver. CAUTION To avoid damaging the printer, use only labels that are recommended for laser printers. To prevent serious jams, always use Tray 1 or Tray 2 to print on labels. Never print on the same sheet of labels more than once or print on a partial sheet of labels. When selecting labels, consider the quality of each component: ■ Adhesives: The adhesive material should be stable at 210°C (410°F), which is the printer fusing temperature. ■ Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious jams. ■ Curl: Before printing, labels must lie flat with no more than 13 mm (0.5 inch) of curl in any direction. ■ Condition: Do not use labels that have wrinkles, bubbles, or other indications of separation. Transparencies Use only Tray 1 or Tray 2 to print on transparencies. Select Transparencies from the Print dialog box or the printer driver. The printer supports printing on color transparencies. Use only transparencies that are recommended for use in laser printers. Transparencies that are used in the printer must be able to withstand 210°C (410°F), which is the printer fusing temperature. CAUTION To avoid damage to the printer, use only transparencies that are recommended for use in laser printers. Media support tables This section contains information about the sizes, weights, and capacities of paper and other print media that each tray supports. Supported print media for Tray 1, Tray 2, and optional Tray 3 This section contains information about the sizes, weights, and capacities of paper and other print media that each tray supports. Tray 1 and Tray 2 specifications Table 1-5 Tray 1 and Tray 2 specifications Tray 1 and Tray 2 Paper Dimensions1 Minimum: 76 x 127 mm (3 x 5 inches) Weight 60 to 163 g/m2 (16 to 43 lb) Capacity2 Single sheet of 75 g/m2 (20 lb) paper for Tray 1 ENWW Print-media specifications 17