HP 5000ps HP DesignJet 5000 Series Printer - Pocket Guide - Page 41

pocket.book Page 39 Sunday, October 29, 2000 5:09 PM 39 - Load & Unload Media Installing a New Roll into the Printer 1. Make sure the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving. 2. Remove the empty spindle by pulling firmly on each end A and then B as indicated below. Installing a New Roll into the Printer The spindle has a stop at each end to keep the roll in position. The stop at the left-hand end can be removed to mount a new roll, it slides along the spindle to hold rolls of different widths. 3. Remove the removable stop (A) from the left-hand end of the spindle. 4. The media roll may be very long, rest the spindle horizontally on a table and load the media on the table. LOAD AND UNLOAD MEDIA file:///D|/hydra/ug_loc/f